5000L Dongfeng oil refueling tanker - CLW5061GJY3

5000L Dongfeng oil refueling tanker, 1.brand new truck, 2.capacity :5000L, 3.horse power :95, 4.factory dircetly sale - details see: https://www.vehicleto.com/5000l-dongfeng-oil-refueling-tanker-10043056
Condition: NewStorage: OilDrive Wheel: 4x2Horsepower: < 150hp
Transmission Type: ManualFuel Type: DieselTank Volume: < 5000LEngine Capacity: 3856 ml
Dimensions (L x W x H) (mm): 5990*1960*2400 mmBrand Name: DongfengPlace of Origin: Hubei China (Mainland)Model Number: CLW5061GJY3
Gross Vehicle Weight: 3365   
5000L Dongfeng oil refueling tanker
contact supplier for 5000L Dongfeng oil refueling tanker


5000L Dongfeng oil refueling tanker

1.Brief Introduction

A petrol fuel tank is a safe container for flammable fluids. Though any storage tank for fuel may be so called, the term is typically applied to part of an engine system in which the fuel is stored and propelled (fuel pump) or released (pressurized gas) into an engine. Fuel tanks range in size and complexity from the small plastic tank of a butane lighter to the multi-chambered cryogenic Space Shuttle external tank.

Typically, a fuel tank must allow or provide the following:

Storage of fuel: the system must contain a given quantity of fuel and must avoid leakage and limit evaporative emissions

Filling: the fuel tank must be filled in a secure way, without sparks

Provide a method for determining level of fuel in tank, Gauging (the remaining quantity of fuel in the tank must be measured or evaluated)

Venting (if over-pressure is not allowed, the fuel vapors must be managed through valves)

Feeding of the engine (through a pump)

Anticipate potentials for damage and provide safe survival potential.

Plastic (high-density polyethylene HDPE) as a fuel tank material of construction, while functionally viable in the short term, has a long term potential to become saturated as fuels such as diesel and gasoline permeate the HDPE material.

Our Fuel tanker

1. The material of our fuel tanker product is made of 4mm-6mm high-quality carbon steel from Wuhan steel company, according to national standards for tanker production (also in accordance with European standards of production), abutting joint welding process. Elliptical or square round shape tank.

2. tank is made by butt-welding technical, inside the tanker, there are multi-plates of anti-wave, after tanker framed, high-pressure gas tank leak detection, so that the tank has a high strength, stable center of gravity, vehicle is safe and stable and so on.

3. after welding, using shot peening pre-treatment process to avoid corrosion and dust, paint is used advanced technology. Beautiful looks, durable.

4, according to customers’ needs, the pump can be designed to pump in and out throw meter, or not through meter, self-flow through or not through meter and some other functions.

5, according to users’ needs, can be designed as a single compartment or several compartments for store oil, chemicals, drinking water.

6. Depending on the application needs, you can choose to install heating pipes, insulation layer.

Insulation material is generally 50-100mm thickness; filling material can be used rock wool, polyurethane foam, aluminum silicate. Metal surface insulation is 1.2mm cold plate, stainless steel sub-mirror or matte board, it is 1.0mm thick.

7 according to the needs, at the end or side of the tank, it can be installed 1-3 self-flow valve.

The picture and parameter mentioned above is only for reference. The Specific product will be produced according to your requirements.

2. Technology Specification

Item

unit

parameter

Vehicle model

CLW5061GJY3 Fuel Tanker

Chassis model

EQ1060TJ20D3

Overall dimensions

mm

5990×1960×2400

Fact cubageL

5000

Mass in working orderkg

Appro×3365

Body internal dimensions

mm

3100×1750×1150

Wheel base

3300

F/R track base

1506/1466

Approach/departure angle°

18/12

Exhaust/kw

ml/kw

3856/70

Max speed

km/h

90

Tire specification

7.00-16Engine typeCY4102-C3F

Traction system

4×2transmission5-speed with over drive

Number of axles

2Electric system12v

Operation control system

Electrically hydraulic controlAllowable passengers in cab3

Equipment

Meterial:4mm carbon steel.can choose flow meter, tankerpiston and bobbin disk

Tank can be separated to several unattached small tanks to fill different fuels

Engine

Dongfeng Chaoyang diesel engine,95hp

Production cycle

10-15 days

Warranty

12 month,from the date of supply

FOB Shanghai

USD

3. Picturesshow

4. Our Factory & certificate

5.Payment terms and delivery

Delivery date: 20-25 business days

Payment terms: pay 30% of contract value as prepayment after sign contract and pay the rest after the goods finished.

Packing: nude, covered with wax, small type can be put into 20'GP or 40'GP, big type can be carried by bulk carriers or ro-ro ship or according to your requirements

6.Remarks

The above information is just for your reference. We can manufacture the trucks as per your request and we can fulfill all your demands.

Should you have any other questions or need any other information, pls feel free to contact me. It would be my great pleasure to be on your service. Pls check my contact information as following

Packaging Detail:Waxing without package.
Delivery Detail:10-15 days.

Related Product for 5000L Dongfeng oil refueling tanker