5cbm ISUZU fuel tanker truck - CLW5070GJYK
Condition: New | Storage: Oil | Drive Wheel: 4x2 | Horsepower: < 150hp |
Transmission Type: Manual | Fuel Type: Diesel | Tank Volume: 5001 - 10000L | Engine Capacity: 2999 |
Dimensions (L x W x H) (mm): 5900*1860*2380 | Brand Name: ChengLiWei | Place of Origin: Hubei China (Mainland) | Model Number: CLW5070GJYK |
Gross Vehicle Weight: 3931 |
4*2 ISUZU fuel truck 5000L
1.Brief Introduction
A petrol fuel tank is a safe container for flammable fluids. Though any storage tank for fuel may be so called, the term is typically applied to part of an engine system in which the fuel is stored and propelled (fuel pump) or released (pressurized gas) into an engine. Fuel tanks range in size and complexity from the small plastic tank of a butane lighter to the multi-chambered cryogenic Space Shuttle external tank.
Typically, a fuel tank must allow or provide the following:
Storage of fuel: the system must contain a given quantity of fuel and must avoid leakage and limit evaporative emissions
Filling: the fuel tank must be filled in a secure way, without sparks
Provide a method for determining level of fuel in tank, Gauging (the remaining quantity of fuel in the tank must be measured or evaluated)
Venting (if over-pressure is not allowed, the fuel vapors must be managed through valves)
Feeding of the engine (through a pump)
Anticipate potentials for damage and provide safe survival potential.
Plastic (high-density polyethylene HDPE) as a fuel tank material of construction, while functionally viable in the short term, has a long term potential to become saturated as fuels such as diesel and gasoline permeate the HDPE material.
Our Fuel tanker
1. The material of our fuel tanker product is made of 4mm-6mm high-quality carbon steel from Wuhan steel company, according to national standards for tanker production (also in accordance with European standards of production), abutting joint welding process. Elliptical or square round shape tank.
2. tank is made by butt-welding technical, inside the tanker, there are multi-plates of anti-wave, after tanker framed, high-pressure gas tank leak detection, so that the tank has a high strength, stable center of gravity, vehicle is safe and stable and so on.
3. after welding, using shot peening pre-treatment process to avoid corrosion and dust, paint is used advanced technology. Beautiful looks, durable.
4, according to customers’ needs, the pump can be designed to pump in and out throw meter, or not through meter, self-flow through or not through meter and some other functions.
5, according to users’ needs, can be designed as a single compartment or several compartments for store oil, chemicals, drinking water.
6. Depending on the application needs, you can choose to install heating pipes, insulation layer.
Insulation material is generally 50-100mm thickness; filling material can be used rock wool, polyurethane foam, aluminum silicate. Metal surface insulation is 1.2mm cold plate, stainless steel sub-mirror or matte board, it is 1.0mm thick.
7 according to the needs, at the end or side of the tank, it can be installed 1-3 self-flow valve.
The picture and parameter mentioned above is only for reference. The Specific product will be produced according to your requirements.
2. Technology Specification
Vechcile information list | |||
Truck brand | CLW | ||
Truck model | isuzu fuel truck | ||
Gross weight | 7300 | Tanker volum | 5cbm |
Rated weight | 4070 | Overall dimension | 5750×1880×2160 |
Curb weight | 3100 | Body dimension | ×× |
Cabin seat | 2 | 0.60 | |
A/D angle | 16/16 | F/R overhang | 1075/1315 |
Axles | 2 | Wheel base | 3360 |
Axles loading | 3230/4070 | Max speed | 100 |
Chassis information list | |||
Chassis model | NKR77LLPACJAY | ||
Brand Name | isuzu | Manufacturer | isuzu |
Overall dimension | 5900×1880×2160 | Tyre quantity | 6 |
A/D angle | 24/16 | Tyre size | 7.50-15,7.50R15,7.00-16,7.00R16 |
Leaf spring quantity | 8/6+5 | Front track | 1504 |
Fuel type | Diesel | Rear track | 1425 |
Standard | Euro III | ||
Engine model | Manufacturer | Displacement | Power |
4KH1-TC | isuzu | 2999 | 96 |
3. Picturesshow
4. Our Factory & certificate
5.Payment terms and delivery
Delivery date: 20-25 business days
Payment terms: pay 30% of contract value as prepayment after sign contract and pay the rest after the goods finished.
Packing: nude, covered with wax, small type can be put into 20'GP or 40'GP, big type can be carried by bulk carriers or ro-ro ship or according to your requirements
6.Remarks
The above information is just for your reference. We can manufacture the trucks as per your request and we can fulfill all your demands.
Should you have any other questions or need any other information, pls feel free to contact me. It would be my great pleasure to be on your service. Pls check my contact information as following
Packaging Detail:with antirust wax on the surface |
Delivery Detail:15-25 days |