Bomb Cart Trailer - 2680

TECHNICAL SPECIFICATION
TERMINAL BOMB CART TRAILER CORNER LESS
SKELETAL CONTAINERIZED SEMI TRAILER
45 FT / 65 TONS
SPECIFICATION FOR TERMINAL ROLL TRAILER 45FT/65T (BOMB CART)
1.0 GENERAL
1.1 Design
1.2 Dimensions
1.3 Warranty
1.4 After Sales Service
1.5 Spare Parts list
1.6 Operating Conditions
2.0 SPECIFICATIONS
2.1 Load Capacity
: The trailer is design to operate with the following
Containers:
1 or 2 x 20 ISO container
1 x 40 ISO container
1 x 45 ISO container
: See attached drawings No 20110820-1
: 1 Year on complete trailer except on tyres and leaf
springs.
: All parts and components for trailers on stock.
: A recommended spare parts list will be supplied.
: The Trailers must run on hard level surfaces within the
Port and Container Terminal.
Roll Trailers can operate in a salt dust laden environment
of high temperature and humidity.
Ambient Temperature variation : 3 C to 51 C
Relative Humidity : 48% to 100%
Dewpoint : 2 C to 34 C
: Capable of carrying and transporting:
One ISO 45ft fully loaded container.
To a weight of 65 Tons (payload).
2.2 Chassis
2.3 AXLES OF THE SUSPENSION
SYSTEM
2.4 Cross Beam
2.5 Side guard supports
2.6 Side guard
2.7 King Pin
2.8 Tyres
2.9 Rims
: 2 No. 550 x 180mm mill rolled I-Beam
Flange plate thickness: 16mm, web plate thickness:
10mm
: BOGIE SYSTEM L1 AXLE, 10Holes
Capacity: per axle 18 tons at 100Km/h
22 tons at 25Km/h
: Cross members 200mm H-Beam
: 200mm H-Beams
: 20mm thick side guard with steel reinforced shaft
: 2 SAE welded onto 10mm skid plate, set at 700mm from
front end
: 8 No. Double Coin TUBELESS 11.00 R 22.5 (Other brand
on special request)
: 8 No. 8.25-22.5 10Holes
2.10 Wheel guard and mud flaps : 4 No. Rubber wheel guard and 2 No. mud flaps
2.11 Landing Gear : York retractable legs 2 speed. 19 inches
2.12 Electrical System : 24 volts with 7 pin connector. Comply with European standard.
See attached drawing No 20110820-2. CIMC Drawing.
2.13 Brake system: 2 lines air brake system w/ tank and emergency valve, brake chambers and mechanical slack
adjusters.
See attached drawing No 20110820-3. CIMC drawing.
2.14 Reflectors
2.15 Painting
3.0 MANUALS
3.1 Maintenance manuals
4.0 SPARES
4.1 After Sales Service
4.2 Spare Parts list
: 2 No. red triangle reflector at the rear + 4 amber on each
side.
: Seawater proofed and waxed
Shot blasted and painted with 1 layer of Zinc epoxy
Primer + 3 layers Alkyd finish top coat.
Color and marking will be RAL1018, Zinc Yellow
: 2 No. Maintenance manuals including spare parts.
(Four sets of each to be in Chinese and two sets of each in
English).
: All parts and components for trailers need to be
available.
: A recommended spare parts list will be supplied by CIMC
prior to the end of production.
UNIT PRICE FOB CHIN APORT USD 17500 OR CIF COLOMBO PORT
USD 25,800.00