Catamaran 28 SailBoat - Catamaran 28

Catamaran 28 SailBoat

Exterior Standard Equipment

·Hull and deck construction :12mm thick 'Core-Cell 'linear polymer foam-core and polyester resin sandwich. White gelcoat or 'Awfgrip' finish. Low-friction anti-fouling coating below waterline.

·Keels: NACA section, foam-core, two compartments in each keel for bilge and/or shower sump.

·Hull Foredeck Hatches: Two SS, hinged hull exit hatches with inside handles, complete with insect screens.

·Bridge deck Beam Fore hatches :Two FRP top hinging sail lockers.

·Companionway Hatches: Two FRP, top hinging, lockable, With removable wooden drop boards.

·Anchor Hatches: Two FRP , side hinging, self draining, one heavy duty folding type 'Danforth' anchor complets with galvanized shackies, 5 meter length of 6mm galvanized chain and 50 meters of 10mm nylon rode.(See options).

·Windows: Three non-opening 6mm thick darkened acrylic in each hull and two 6mm thick non -opening darkened windows in the bridge deck cannopy.(see options).

·cockpit seating for 8+,four backrest storage lockers, one insulated cooler seat locker, one ventilated fuel seat locker. Moisture and fire resistant seat cushions under canopy .Hinging FRP engine cover with hardwood table top.

·Deck Hardware: Four 200mm SS mooring homs. Four 6mm SS pad eyes, two 'six line 'organizers, two 'four line' clutches, two 'single line' clutches, aluminum jib track c/w car and stoppers, two halyard tuning blocks, four 'two speeds' self tailing winches, two winch handles, aluminum mainsail track c/w car and stoppers, six stanchion posts c/w single 4mm SS lifelines, two chromed bow pulpits, two stem chromed boarding handrail, FRP molded transom steps.

·Trampoline: Quick draining, UV resistant

·Mast Lightweight 12m Carbon Fibre, socket mounted, double diamond column, 6mm stays, lines inside mast, integral molded electrical conduit, c/w SS ball base mount and exiting line blocks. Double spreaders.

·Boom: Lightweight 3.7m Carbon Fibre, c/w jackstays, reefing homs.

·Mainsail: Pentex, computer cut, square top, high roach, fully battened, 3reefs.

·Jib: Pentex, computer cut, self tacking.

·Mainsail cover.

·'Dynema 'halyards and reefing lines.

·Port, starboard, stem running lights.

·75mm bulkhead mounted compass.

Interior Standard Equipment:

·Buoyancy tanks fore and aft in each hull, bow crash bulkhead in each hull.

·Four double berths 1.2m(4'-0")wide,1.94(6'-4")long.75mm(3")thick foam cushions with removable fabric covers.

·Forward cabins include a zippered hanging locker and four storage lockers.

·Privacy curtains between cabins, curtains and track over side windows.

·Port and starboard settees 400mm(1'-4")wide,1.6m(5'-3")long.

·Port side galley fitted with a stainless steel sink, water faucet, valve through-hull drain. Shelving, insulated draining ice-box, space for microwave and galley stove(see options). Galley work surface is non-staining, washable heat resistant laminate c/w hardwood trim. Fresh water storage tank 501(13 gal.)

·Starboard side navigation/computer area with chart storage and shelving. Marine head with 401(10 gal.) holding tank c/w deck pump-out fitting. Sink with mirror and storage lockers below(see options). Shower drain to keel sump.

·Electrical: two 12v -70A deep cycle marine batteries in vented compartments, two 12V fused electrical panels, eight 'LED' type locally switched light fixtures (one in each cabin), two keel installed, fused bilge pumps c/w hoses, 110V-30a shore power connection c/w overload protection and four receptacles (see options).