DC 12V 750GPH Boat Automatic Submersible Bilge Water Pump With Float Switch

• This product is 100% brand new, and comes packed in original Seaflo™ box
• Compact, automatic, fully submersible electric pump
• Built-in float switch! (No separate float switch is needed)
• Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
• No power use until pump is activated by internal float switch (when water level rises)
• Compact, efficient, long life motor
• Rustproof and corrosion resistant
• Stainless steel shaft
• High-impact durable plastic housing
• Quick release strainer for easy maintenance
• Extremely efficient, very low current draw and offer high capacity output
• Water cooled long-life motors
• Ignition protection to protect the pump against high current
• Water/moisture tight seals
• Silent and vibrationless operation
• Anti-air lock protection
• Will not burn out when run dry
• Integrated float switch TEST button at rear of unit
• Can be used with switch panel for manual override
• Includes comprehensive user manual with installation instructions and wiring diagram

Specifications

• Voltage: 12V DC
• Flow capacity: 750 Gallons per hour (2850 Litres per hour) - 47.5 Litres per minute
• Max. delivery head: 3.8 metres (height of vertical water flow up pipe)
• Current draw: Only 3 Amp
• Hose Outlet: 19mm (3/4")
• Dimensions: Length 145mm (5.71") x Width 83mm (3.27") x 103mm (4.05")
• 3-wire lead, approx. 1m long
• Approvals: CE

Applications

• Typically used in boat hulls / bilges
• Bait tanks
• Ponds, pools, spas
• Other applications where you have to remove water from
• Note: These pumps are designed for intermittent use only, NOT designed for continuous use