Dual aviation obstruction light/Twin weatherproof aircraft Light/led obstacle light - LS310C
|Type: Lamp||Condition: New||Place of Origin: Shanghai China (Mainland)||Model Number: LS310C|
|Brand Name: NANHUA|
LS301C Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light
Main functions and features.
• Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required
• Based on LED technology, low power consumption, and high efficiency.
• Lamp housing –Polycarbonate, with good anti-impact strength, thermal stability, high transmittance.
• Aluminum alloy base with the advantage of light weight and corrosion resistance.
• G3/4”pipe is available, ease of mount.
• with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount.
• Built-in micro monitoring controller unit, when and if the service light fails the controller switch on the standby light automatically.
• Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).
• With outputting alarm signal(optional)
• Extremely Reliable — Major Maintenance Cost Saving
|Standard||Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810||Vertical degree||≥10°|
|Light source||High quality LED||Horizontal degree||360°|
|LED color||Aviation red(Other color can be customized)||Flashing rate||30FPM(20-60FPM/|
|Operating voltage||AC110-240V/ DC48V (Other voltage can be customized)||Flashing duration||150±20ms|
|Power consumption||6W(Steady burning)|
|Operating temperature||-40°C ~ +70°C||IP Protection||IP65|
|Relative humidity||10% ~ 95% (no condensing)||Weight||4.5kg|
Reflector:ABS,vacuum aluminum film
Installation and operation
• Check whether the supply voltage does comply with the rated voltage of the lamp.
• Fitting the light on the G3/4” mounting bracket, which should be fixed on a smooth surface with enough mechanical strength. Or you can select our mounting bracket: PJ005, PJ024. (Secure the light reliably against falling in operation.)
• If the light is built in photocell, please do not make photocell facing to light source,also make sure the photocell is not blocked by objects.
• Open the junction box cover, connect power cable and earth wire to corresponding terminals and then remount the cover.
• Switch on the power, and then the light works
• Temperature rise inside the control box is normal phenomenon
• Please do not open any components inside by yourself
• This product is a sealed structure, do not open, otherwise the company will not warranty
|Packaging Detail:packed in carton.|
|Delivery Detail:5-15 days|