electric vintage golf cart car washer made in China

Oxyhydrogen carbon clean machine, High efficiency, Electrolytic reaction, Water as fuel, Low Cost & Maximum Economy - details see: https://www.vehicleto.com/electric-vintage-golf-cart-car-washer-made-in-china-10029390

Appearance Size: 750560H800MM	Rated Capacity: 4KVA	Rated Gas Production: 1000L/H	Work Way: Continuous
Water Consumption: 0.4L/H	Flame Temperature: 800-2000 ℃ adjustable	Weight: 160KG	Relative Humidity: ≤90%
Insulation Protection Grade: F	Place of Origin: Hunan, China (Mainland)

electric vintage golf cart car washer made in China

contact supplier for electric vintage golf cart car washer made in China

The machine

The principle

1. The principle is based on the theory of electrolysis.

There is a Oxy-hydroge generator in the machine, which is able to electrolyze water (H2O) to hydrogenand oxygen gases.

Fuel is generated using only electricity and clean soft water.

Both economical and practical when compared to the currently used LPG, Propane, or

acetylene.

3. Water through the electrochemical reaction, then creating hydrogen and oxygen gas.

there will be a brown gas, which is the mixture of hydrogen and oxygen gas.

4. Burning the gas then form Oxy-hydrogen flame.

When burned, this fuel do not generate Co, Co2 or other toxic gas, is a clean and recyclable sourceof energy, which isOxy-hydrogen flame

5. Oxy-hydrogen flame is a high temperature energy source which can be used for carbon cleaning.

The Oxy-hydrogen flame can use for cleaning carbon, cutting, welding and heating.

The operation picture

Procedure

First, open the engine and connect the tube.

Second, start the machine

Third, wait and watching the effect change.

Advantage

1. Energy-efficient:

The product is consumed only water and electricity in the whole course of using, and It cleans awaycarbondepositionefficiently, Pls look at follows.

Test items	Before clean carbon	After clean 20 minutes	After clean 40 minutes	Finished cleaning	Gas lower rate
CO (%)	0.65	0.36	0.38	0.15	75
HC (PPM)	415	418	146	98	75
CO₂(%)	14	13.9	11.9	14.7	-3
O₂	1.35	1.53	4.15	1	26
NO₂	74	90	72	18	74

2. Safety and Pro-environment:Water as the main raw material, and the Oxy-hydrogen flame will be reverted into water after burning,so there won't oil, chemical, material cost.In addition, the machine setsmultiple safety devices, such as temperature protection, overvoltage protection, water protection, so It is a good choice.

3. Convenient and Time-saving:It just needs 20-40 minutes and easily handle. Operation by computer control panel, human to computer Interface is simple and easy.

4. Quality-assured and High-tech:Withnewest technologies, It could clean carbon for varied car. And It isQuality-assured.

5. Own workshop:Welcome to visit our factory in any time.

Specification

Items Specifications	WT-1000
Supply Voltage	Three-phase 380V (50-60) HZ±10%
Rated Capacity	4KVA
Rated Gas Production	1000L/H
Water Consumption	0.4L/H
Work Way	Continuous
Flame Temperature	800-2000°Cadjustable
Work Pressure	≤0.08Mpa
Environment Temperature	0-40°C
Relative Humidity	≤90%
Power Supply Protection Grade	IP21S
Insulation Protection Grade	F
Appearance Size	750560H800MM
Weight	160KG
In Addition To Carbon Medium	Hydrogen and oxygen molecules carbon removal agent

Comparison

Oxy-hydrogen carbon cleaning machine compared with the traditional methods

	oxy-hydrogen carbon cleaning machine	Traditional methods
Time	30 minutes	60 minutes
operability	No need to remove the engine, just connect thetrachea	Have to remove the engine,consume long time ,high cost of human
Carbon cleaning effect	Clean surface of combustion chamber,top of the piston,spark plug,Oxygen sensor,three yuan catalysts of carbon	Artificial remove,spark plugneed to clean by human
Chemical	Complete combustion, no damage to theoil seal,gasket, engine	Chemical reagent, not suitable for long term use
Environmental protection	New energy, no pollution, low carbon energy saving	Air pollution,emissions ofchemical wastewater