Helicopter Kit Production Set - Zeus II

HELICOPTER KIT PRODUCTION SET - details see: https://www.vehicleto.com/helicopter-kit-production-set-10000839
Type: OtherBrand Name: ZeusPlace of Origin: California, United StatesModel Number: Zeus II
Helicopter Kit Production Set
contact supplier for Helicopter Kit Production Set


Here your dream can come true. MANUFACTURE TWO SEAT HELICOPTER KIT.

Development of this helicopter costs over $400,000, but you can have it for fraction of that price. Do not let this opportunity get away.

Sale includes:

1-Complete running prototype of helicopter with governor.

2-All the composition parts (blue) to assemble cabin (the green film on the cabin parts is mold release washable with water).

3-Molds (red) for complete cabin production.



6-Static balancers for main and tail rotor.

7-Large windshield oven with large vacuum pump (windshield is one piece).

8-Windshield mold.

9-Vertical engine test stand.

10-Technical drawings in AutoCAD (software is included).

11-Aditional display engine (demo).


Due to the molds, you can build as many helicopters as you desire. Sky is the limit.

The helicopter is powered by Chevy V6 four stroke gasoline engine in vertical position, but it could adapt most of the automotive engines or turbine engine. Utilizing dual ignition and dual fuel pumps for dependability. Transmission is gear and pressure lubricated. On entire helicopter is only one v-belt powering alternator. Tail rotor is shaft driven with gear box in oil bath.


Gross Weight 762kg / 1680 lbs

Empty weight 490kg / 1080 lbs

Seats 2

Length 6.5m / 21.3 ft

Height 2.5m / 8.4 ft

Skid width 2.0m / 6.5 ft

Power plant 127kw (170HP) liquid cooled

Gallons 82 liters / 22 US gal

Helicopter was developed in 1993-1998. Two prototypes were built and went through hours of testing (about 170 hr). Helicopter never got to production because we ran out of funds in 1998.

Most of the mechanical components are "stock product" and it can be purchased off the shelf (list of the suppliers is provided with sale). Gear boxes can be machined from one piece (expensive way for small number production) or cast of aluminum (economic way for larger production). Drawings of gear boxes are provided with sale. Rotor blades are also "stock item". Drawings of main gear box for horizontal engine application are also included, if you decide to install a different engine.

The GM (Chevy) engine can be replaced by a lighter aircraft Lycoming engine and can still be in a vertical position.

There is only one company in the USA manufacturing a similar helicopter kit (two seat) and another in Canada. You can be third.

The Purchaser assumes all risk, liability and responsibility relative to the construction and/or operation of said aircraft. Purchaser assumes the full responsibility for risk of use of the aircraft and to hold seller harmless for any and all consequences of any accident. Seller admits no liability by publication of this writing. SOLD AS IS.

We will ship worldwide. It will take full 20 ft. container to ship the production set. Cost of the container shipping over seas would be about $2500-$4300 depends on country of destination. Local pick up is available.

Packaging Detail:20 foot container
Delivery Detail:30-60 Days

Related Product for Helicopter Kit Production Set