hot dipped galvanized tent camper trailer RC-CPT-07 - RC-CPT-07

hot dipped galvanized tent camper trailer RC-CPT-07

Trailer surface finish

Fully hot dip galvanized 7x4 camper trailer (the best anti-rust finish compared with powder coated or painted finish)

Trailer size and weight

Box deep: 500mm

Box top from ground: 1100mm approximately

Tare mass: 540kg

Trailer body construction and materials

Aluminum front and rear 3mm thick checker plate panels (reduce tare weight of the trailer)

Fully hot galvanized steel checker plate trailer box as well as side steps and mudguards, steel thickness: 3mm

Full 70x50x2.5mm RHS chassis and cross beams

100x50mm draw bar with reinforcement bar welded underneath for the toughest ride

Extended draw bar with a total length of 2000mm (excluding coupling) for easy corner turning; the length of the draw bar from the front trailer box panel to the front end of the draw bar is 1470mm.

Full size side steps

Trailer suspension and wheel

45mm solid round axle, 10" drum hub with heavy duty Ford bearing (LM), 6 stud Landcruiser pattern

10" electric brake + hand brake

6 Leaf x 8mm (plate thickness) x 45mm long span off road eye-to-eye shackle spring with shock absorbers

Off road all terrain wheels: 3x15” wheels, steel powder coated rims and 235/75R15 tires (DOT certified), 6-stud pattern, including 1x Spare wheel

Trailer details & accessories

1. Safety chains: hot dip galvanized, comply with Australian standard, with Australian standard markings

2. Australia standard Orac type hitch, complies with Australian standard, with Australian standard markings

3. Jockey Wheel - swing up type with 8” solid wheel

4. Galvanized stone guard

5. 2 Jerry can holders (front side steps), 2 gas bottle holders (rear side steps)

6. Checker plate Aluminum Toolbox 1200X500X500mm (Model: ATB), thickness: 2.0mm.

7. Gas struts for easy lifting up the tent

8. Wind down rear stabilizer legs + raising/lowering tool

9. Number Plate Holder

10. Rear receiver for bike carrying rack

11. Weather proof Tent Mounting Hardware (Hinges, hooks and Latches)

12. Gas struts for easy lifting up the tent

Trailer kitchenette

70L stainless steel water tank with electric pump

Full stainless steel kitchen, stainless steel sink (14cm deep) with drainer and hose

Comes with side tap and lockable aluminum water filler

Trailer electric set-up

LED tail Lights and number plate lights

7-pin plug: flat or round plugs available for choice

Wire cable: standard 6-core wire cable

Attention

Trailers can be built as per customer’s special requirements

The tent specification is as per RC-T6003 with single annex, with 14OZ canvas RIP-STOP, more annex can be added at extra costs.

Jerry cans, Gas stove/ burners can be supplied at extra cost,

Gas bottles are not supplied.

Optional

360 degree Treg Poly Block hitch coupler

Large size PVC mesh stone guard

Extra gas bottle holders and jarry can holders on the drawbar

Carpet lined

Spare wheel mounted on the tail gate

Change the front panel and rear gate to be steel checker plate