kit bicycle electric 48V10AH
Voltage: 48V | Design: Brushless | Wattage: 201 - 300w | kit bicycle electric: 48V10AH |
Lifespan: More than 2000times | Protection: Built-in smart BMS and 30A FUSE | Environment: Non-toxic | Security: No fire,explosion,leakage |
Certification: CE,UN38.3,MSDS | Other accessories: Back rack and smart charger | Discharge temperature: - 20 ~ 60 | Charge temperature: 0 ~ 45 |
Storage temperature: - 20 ~ 45 |
kit bicycle electric 48V10AH
Item No. | Voltage | Capacity | battery type | Lifespan | BMS Option | Charger Option | Dimensions | Weight |
G-BP4810 | 48v | 10ah | lifepo4 | >2000 cycles | 20Amps | 2Amps | 69*148*370mm | 4.8kgs |
25Amps | 3Amps |
kit bicycle electric Advantage
a. Extremely safe and stable chemistry: PCB and/or BMS built inside to balance protect the battery.
b. Long life-cycle: Can be circularly used, more than 2000 times recycles, 8 times of Lead acid battery.
c. Lighter weight, with the best power-to-weight ratio: 1/3 of Lead acid battery weight.
d. Good performance at high temperature and high temperature resistance
e. Low self-discharge rate, less than 3% monthly.
f. No memory effects and highly efficient charge.
g. Environment friendly: Clean and Green energy poses no pollution on our environment.
kit bicycle electric Characteristics
a. Waterproof battery box with rubber ring ;
b. Portable handle and hidden charging port;
c. Aluminium alloy Back rack(Silver and Black for option);
d. Well die-casting slide board and lock, for easy installation and theft-prevention.
e. 30A Fuse is included for protection
f. 16pcs polymer lifepo4 battery cells and smart BMS built-in
kit bicycle electric Performance
1.Electrical characteristics
NO. | Item | Requirements | Test Method |
1 | Discharge rate performance | Discharge Capacity/ Nominal capacity×100% A) 0.3C5A ≥100% B) 1.5C5A ≥90% | a)Standard charge at 0.3C5A under the condition of normalatmospheric pressure andthe environmental temperature of20°C±5°C and45%~80% RH, discharge at1I3/4.5I3(A)to 2.0Vor the cut-off voltage which is specified in the technicaldocument of the company. current,and then is describedthe percentage of the nominal capacity(Charge/discharge cycle can be conductedfor 3times before meeting the Standards(the samebelow). |
2 | High-low Temperature Discharge performance | Discharge Capacity/ Nominal capacity×100% A) 55 °C ≥95% B) -20°C ≥55% | After Standard charging. Then store it at the constant temperature of 55±2°C for 5h to 2.0V or the cut-off voltage whichis specified in the technical document of the company,the capacity(AH)=the dischargetime*discharge current, and then is described the percentage of thenominal capacity. |
3 | Normal Storage/ High Temperature Storage | Residual Capacity≥Nominalcapacity*80% Recoverable capacity≥ Nominal capacity*90% | Store for 28 days(Store for 7 days at the constant temperature of 55±2 °C)afterstandard charge, then measure final status and residual capacity at 0.3 C5A to 2.0Vor the cut-off voltage which is specified in the technical document of thecompany; be conducted for 3 times,recoverable capacitywill be tested. |
4 | Storage Performance | recoverable capacity ≥nominal capacity *95% | Standard charge and then rest for 1H,then discharge for 2Hat0.3C5A,storge for 90days at 20°C±5°C,After standard charge,then discharge at 0.3C5A,(Charge/dischargecycle can be conducted for 5 times before meeting the Standards(the same below) |
5 | Cycle Life | Discharge Capacity≥ Nominal capacity*80% | Conduct 0.3C5A/0.3C5A cycle for 2000 times.The discharge capacity shall bemeasured after 2000 cycles. |
2.Safety Performance
NO. | Item | Requirements | Test Method |
1 | Over charge | No fire,no explosion | After standard charging,then Charge at 3C5A to 10.0V |
2 | Over discharge | No fire,no explosion | After standard charging,discharge 0.3C5A to 0Vat 20°C±5°C |
3 | Short Circuit at Room Temperature | No fire,no explosion | After standard charging, keep the battery into a ventilation cabinet and short-circuit the positive and negative terminals directly (general resistance shall be less than or equal to 5mΩ) for 10 minutes |
4 | Drop | No fire,no explosion no leakage | After standard charging, then let it self fall off from a height of 1.5m(the lowest height)to a rigid wooden board with the thickness of 20mm. The drop is implemented one time for every face. |
5 | Hot Oven | No fire,no explosion | After standard charging. Keep the battery in the box with constant temperature of 85°C±2 °C and remained for 2hours at this temperature. |
6 | Crush | No fire,no explosion | After standard charging, keep the batteryon the bracket 1. Extrusion direction:Perpendicular to the direction of maintaining pressure on the battery plates. or internal short circuit (battery voltage becomes 0V) |
7 | Needle puncture performance | No fire,no explosion | After standard charging, keep the battery on the bracket,penetrate through it with a 3mm~8mm diameter nail near the center of its biggest surface at the rate of 10mm/s-40mm/s. |
bat kit bicycle electricperformance graph
WhychooseG-PowerBattery?
G-Power is a leading hi-tech enterprise combining technical research, development, manufacture and marketing. Specializes in researching, designing and manufacturing lithium ion batteries,LiFePO4 batteries,etc.
kit bicycle electricCustomer Feedback
Your 48v rack battery give me a surprise, woo. i'll never change the supplier, you're the best that i've come across. --- Chris(from United Kingdom) )
kit bicycle electric Order information
Sample is avaliable
Trade term: FOB Shenzhen or Guangzhou; EXW, CIF,DDU and DDP are available.
Delivery time: 3 working days for sample order, 15-25 working days for mass order.
Packing info is as below:
Product | Item No. | QTY | Carton box dimensions(mm) | Gross weight(kg) | ||
Length | Width | Height | ||||
Battery pack | G-BP4810 | 1 | 470 | 160 | 220 | 6.9kg |
Charger | G-CHT/GT48 | 1 |
kit bicycle electric Warranty
2 years since the date of purchase
batte kit bicycle electricWarranty term
1. Under the terms of this warranty, if the product have a failure occurs under normal usage within warranty period, G-Power will provide new products based on the proof-documents.
2. If Failure or damage due to incorrect operation, wire connection, or anything other do not follow our instuction, G-Power will provide paid maintance within warranty period.
More information on our products, pls do not hesitate toinquiry now!
Packaging Detail:1pc battery pack and 1pc charger packing in a PE bag, then put into a double-deck corrugated carton box(dimension:160x220x470mm),each facets are protected well by foam and plastic wrap. Gross weight is 6.9kgs, suitable for express, air and sea transportation. |
Delivery Detail:Sample less than 7days; mass production 20days |