kit bicycle electric LiFePo4 36v10ah - G-BP3610

kit bicycle electric LiFePo4 36v 10ah, Lifespan more than 2000 times, Mult function case, Intelligent BMS,smart charger - details see: https://www.vehicleto.com/kit-bicycle-electric-lifepo4-36v10ah-10009214
Place of Origin: China (Mainland)Brand Name: G-PowerModel Number: G-BP3610kit bicycle electric: 36V10AH
Lifespan: More than 2000timesProtection: Built-in smart BMS and 30A FUSEEnvironment: Non-toxicSecurity: No fire,explosion,leakage
Certification: CE,UN38.3,MSDSOther accessories: Back rack and smart chargerDischarge temperature: - 20 ~ 60Charge temperature: 0 ~ 45
Storage temperature: - 20 ~ 45   
kit bicycle electric LiFePo4 36v10ah
contact supplier for kit bicycle electric LiFePo4 36v10ah


kit bicycle electric LiFePo4 36v10ah

Item No.VoltageCapacitybattery typeLifespanBMS

Option

Charger

Option

DimensionsWeight
G-BP361036v10ahlifepo4

>2000

cycles

15Amps2Amps69*148*360mm4.2kgs
20Amps3Amps

battery bank Advantage

a. Extremely safe and stable chemistry: PCB and/or BMS built inside to balance protect the battery.

b. Long life-cycle: Can be circularly used, more than 2000 times recycles, 8 times of Lead acid battery.

c. Lighter weight, with the best power-to-weight ratio: 1/3 of Lead acid battery weight.

d. Good performance at high temperature and high temperature resistance

e. Low self-discharge rate, less than 3% monthly.

f. No memory effects and highly efficient charge.

g. Environment friendly: Clean and Green energy poses no pollution on our environment.

battery bank Characteristics

a. Waterproof battery box with rubber ring ;

b. Portable handle and hidden charging port;

c. Aluminium alloy Back rack(Silver and Black for option);

d. Well die-casting slide board and lock, for easy installation and theft-prevention.

c. 30A Fuse is included for protection

battery bank Performance

1.Electrical characteristics

NO.ItemRequirementsTest Method
1Discharge
rate
performance
Discharge Capacity/
Nominal capacity×100%
A) 0.3C5A ≥100%
B) 1.5C5A ≥90%
a)Standard charge at 0.3C5A under the condition

of normalatmospheric pressure andthe

environmental temperature of20°C±5°C

and45%~80% RH, discharge at1I3/4.5I3(A)to

2.0Vor the cut-off voltage which is specified in

the technicaldocument of the company.
b)the capacity(AH)=the discharge time*discharge

current,and then is describedthe percentage of

the nominal capacity(Charge/discharge cycle can

be conductedfor 3times before meeting the

Standards(the samebelow).

2High-low
Temperature
Discharge
performance
Discharge Capacity/
Nominal capacity×100%
A) 55 °C ≥95%
B) -20°C ≥55%
After Standard charging. Then store it at the

constant temperature of 55±2°C for 5h
(of -20±2°C for 20h),and discharge at 0.3C5A

to 2.0V or the cut-off voltage whichis specified

in the technical document of the company,the

capacity(AH)=the dischargetime*discharge current,

and then is described the percentage of thenominal capacity.

3Normal
Storage/
High
Temperature
Storage
Residual Capacity≥Nominalcapacity*80%

Recoverable capacity≥
Nominal capacity*90%
Store for 28 days(Store for 7 days at the constant

temperature of 55±2 °C)afterstandard charge,

then measure final status and residual capacity

at 0.3 C5A to 2.0Vor the cut-off voltage which is

specified in the technical document of thecompany;
After charge/discharge(0.3C5A/0.3C5A)cycle can

be conducted for 3 times,recoverable capacitywill be tested.

4Storage
Performance
recoverable
capacity ≥nominal
capacity *95%
Standard charge and then rest for 1H,then

discharge for 2Hat0.3C5A,storge for 90days at

20°C±5°C,After standard charge,then discharge

at 0.3C5A,(Charge/dischargecycle can be conducted

for 5 times before meeting the Standards

(the same below)

5Cycle LifeDischarge Capacity≥
Nominal capacity*80%
Conduct 0.3C5A/0.3C5A cycle for 2000 times.The

discharge capacity shall bemeasured after 2000 cycles.

2.Safety Performance

NO.ItemRequirementsTest Method
1Over chargeNo fire,no explosionAfter standard charging,then Charge at 3C5A to 10.0V
2Over dischargeNo fire,no explosionAfter standard charging,discharge 0.3C5A to 0Vat 20°C±5°C
3Short Circuit

at Room Temperature

No fire,no explosionAfter standard charging, keep the battery into a

ventilation cabinet and short-circuit the positive and

negative terminals directly (general resistance shall

be less than or equal to 5mΩ) for 10 minutes

4DropNo fire,no explosion
no leakage
After standard charging, then let it self fall off from

a height of 1.5m(the lowest height)to a rigid wooden

board with the thickness of 20mm. The drop is

implemented one time for every face.

5Hot OvenNo fire,no explosionAfter standard charging. Keep the battery in the box

with constant temperature of 85°C±2 °C and

remained for 2hours at this temperature.

6CrushNo fire,no explosionAfter standard charging, keep the batteryon the bracket
1. Extrusion direction:Perpendicular to the direction

of maintaining pressure on the battery plates.
2. Extrusion headdress product:≥20cm
3. Extrusion degree: Until the battery shell ruptured

or internal short circuit (battery voltage becomes 0V)

7Needle
puncture
performance
No fire,no explosionAfter standard charging, keep the battery on the

bracket,penetrate through it with a 3mm~8mm

diameter nail near the center of its biggest surface

at the rate of 10mm/s-40mm/s.

battery bank performance graph

WhychooseG-PowerBattery?

G-Power is a leading hi-tech enterprise combining technical research, development, manufacture and marketing. Specializes in researching, designing and manufacturing lithium ion batteries,LiFePO4 batteries,etc.

battery bank Customer Feedback

I think we will be purchasing more of the batteries from you. So far,the batteries that you have sent to us perfection in all aspects,there is the old saying, 'you get what you pay for',in my humble opinion of course.So you know that I am pleased with the product that you provide,thanks.(John from California,USA)

battery bank Order information

Sample is avaliable

Trade term: FOB Shenzhen or Guangzhou; EXW, CIF,DDU and DDP are available.

Delivery time: 3 working days for sample order, 15-25 working days for mass order.

Packing info is as below:

ProductItem No.QTYCarton box dimensions(mm)Gross weight(kg)
LengthWidthHeight
Battery packG-PCB361024403801708.9
ChargerG-CHT/GT361852046525617.5

battery bank Warranty

2 years since the date of purchase

battery bank Warranty term

1. Under the terms of this warranty, if the product have a failure occurs under normal usage within warranty period, G-Power will provide new products based on the proof-documents.

2. If Failure or damage due to incorrect operation, wire connection, or anything other do not follow our instuction, G-Power will provide paid maintance within warranty period.

More information on our products, pls do not hesitate toinquiry now!

Packaging Detail:1) each 2pcs battery pack in one double-deck corrugated carton box(dimension: 170x380x440mm), Gross weight is 8.9kgs2) each 18pcs charger in one double-deck corrugated carton box(dimension: 256x465x520mm)), Gross weight is 17.5kgs
Delivery Detail:Sample less than 7days; mass production 20days

Related Product for kit bicycle electric LiFePo4 36v10ah