LM100(ICAO Medium Intensity Light and FAA--L864 - LM100

LM100 Medium intensity obstruction light for making Towers(Telecom,GSM),Smokestacks (heat-engine plant,coking plant chemical plant etc),Buildings,Port devise,Construction machinery,wind power generator etc for air traffic warning.

Major Functions&Features

• Optics design based on fresnel lens principle

• Based on LED technology, with external long life, low power consumption and high efficiency.

• PC lamp housing with the sound impact resistance, thermal stability and luster effect.

• Die casting aluminum base, shockproof and corrosion resistant.

• No RF-radiations, EMC Compliant. And constant LED drive to prolong led life.

• Sealed material: waterproof sealing ring

• Combustibility rating:UL94-V0

• Windspeed resistance grade: ≥240Km/h

• Light failure alarm or GPS is available if requires

• Mounting bracket is also available if requires

Major Functions&Features

• Optics design based on fresnel lens principle

• Based on LED technology, with external long life, low power consumption and high efficiency.

• PC lamp housing with the sound impact resistance, thermal stability and luster effect

• Die casting aluminum base, shockproof and corrosion resistant

• No RF-radiations, EMC Compliant. And constant LED drive to prolong led life

• Sealed material: waterproof sealing ring

• Combustibility rating:UL94-V0.

• Windspeed resistance grade:≥240Km/h.

• Light failure alarm or GPS is available if requires

•Mounting bracket is also available if requires

Specification

Installation and operation

• Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.

• When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object.

• Make sure the power supply can match the rated power of light before connecting.

• Unfasten three buckles on the base and overturn the lamp body, the n the terminals appear.

• Insert the power cable from the cable gland and then connect them to the corresponding terminals inside the lamp body.

• After finishing the connection, fasten the buckles.

• Check whether the power cables are connected correctly before power on.

Notice

• Ensure that the power connection part is correct before using.

• Temperature rise when light working is normal phenomenon.

• Please do not open any components inside by yourself.

• This product is a sealed structure; Please do not be tampered with by anyone other than registered installer. Once found, we are not warranty.