Low voltage electrical flat car with rail in coal mine
Place of Origin: Henan China (Mainland) | Brand Name: Kuangyuan | Structure: Crane Box and Girder | Certificate: ISO/CE/TUV/SGS |
Weight: 5-300Tons | Application: dc 24v motor car | Wheel Diameter: 500mm | Power Mode Supply: Storage battery power supply |
Reducer: hard-teeth reduction gear | Ground Clearance: ≥50mm | Running speed: 15-30m/min | Height: 650mm |
Low voltage electrical flat car with rail in coal mine
Specifications
1.Low voltage rail flat car
2.Used For heavy load good
3.Use for factory, coal, metallurgy
Since it no use cable, so safe, not afraid of hot, not afraid to drop it, without prejudice to the cross-transport, easy to implement remote control and automation, can be in the corners, even the fork in the roundabout long distance run, to plant rationalization of the transport arrangements to provide favorable conditions. But the track in high demand must ensure rail insulation; more than a certain distance running track should be added copper wire compensation. Long distance running must also be increased number of step-down transformer.
Electric flat car is a low-voltage electric power supply rail flat car, its working principle is to control blood pressure through the ground system, the 380V power supply (three-phase or single phase) voltage down to 36V safe voltage. Fed to the conductor rail (flat as both conductor rail tracks of moving vehicles), the conductive device by the flat car sent the car will be low voltage step-up transformer, step-up to 380V in order to drag the three-phase or single-phase capacitor motors, Flat Car driver to run.
Electric flat car without cables because of the advantages of not only security, but not afraid of hot, not afraid to drop it, without prejudice to the cross-transport, easy to implement remote control and automation, can be in the corners, circular trail running, and appropriately increase the number of step-down transformer can not flat car to run away from the restrictions, to the factory floor to great transport convenience.
Product introduction
Electric flat car with excellent car pars is powered by battery.
The battery is installed in the cart. The DC control system controls the DC traction motor to turn positively and reversely.
Motor drives gear reducer to make wheels move.
Working principle
We use the principle to operate the cart start, stop, go forward, backward, adjust the speed and so on.
Main part
electric flat car
Cart frame, AC motor, gear reducer, wheel, electrical appliance box, remote controller, alarm light etc
and so on.
motor : DC motor has the advantage of big starting torque
gear reduce :The gear of speeder reducer is of smooth transmission feature
charger : The charger has the function of battery maintenance
Advantages
1.battery powered, intelligent charger
2.advanced electric driving system
3.1-300 ton load capacity
4.high safety level
5.box beam structure made our truck more compact
6.variable speed device(VFD)
7.running distance is not limited
8.long service life
9.run on the rails "S", arc-shaped, direct running
type | KPJ | KPJ6 | KPJ10 | KPJ16 | KPJ25 | KPJ40 | KPJ63 | KPJ100 | KPJ160 | |
rated load(t) | 6 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | ||
table-board dimensions(mm) | Length L | 3600 | 3600 | 4000 | 4500 | 5000 | 5600 | 6300 | 8000 | |
Width B | 2000 | 2000 | 2200 | 2200 | 2500 | 2500 | 2800 | 2800 | ||
High H | 550 | 550 | 580 | 650 | 700 | 850 | 900 | 1150 | ||
running speed(m/min) | 30 | 30 | 30 | 30 | 25 | 25 | 20 | 20 | ||
padding-bottom(mm) | 50 | 50 | 50 | 60 | 60 | 60 | 60 | 60 | ||
wheel diameter(mm) | 400 | 400 | 400 | 500 | 500 | 600 | 600 | 600 | ||
wheel pair C(mm) | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | ||
wheel base A(mm) | 2000 | 2000 | 2200 | 2500 | 2800 | 3200 | 3600 | 4500 | ||
motor type | YZ 2.2 2.2 | YZ 2.2 2.2 | YZ 3.7 3.7 | YZ 3.7 3.7 | YZ 5.5 5.5 | YZ 7.5 | YZ 7.5 7.5 | YZ 7.5 7.5×2 | ||
KPJ cable drum | AC380V | AC380V | AC380V 3×6+1×4 | |||||||
Reference weight (t) | 2.2 | 2.5 | 3.2 | 4.3 | 5.7 | 8.3 | 10.2 | 22.5 | ||
Recommended the rail type | P24 YB222-63 | P38 GB183-63 | P43 GB182-63 | P50 GB181-63 | ||||||
Number of wheel/roller pressure | 4/2.2t | 4/3.3t | 4/5t | 4/7.5t | 4/11.5t | 4/18t | 4/27.5t | 8/22.8t |
Packaging Detail:in plywood, FCL. Wooden case or factory package |
Delivery Detail:within 30 working days or according to the specific requirement |