Medium Intensity Aviation Obstruction Light - LM100

Telecom tower light, Tower obstruction light, Compliant with ICAO,FAA,CAAC. - details see: //www.vehicleto.com/medium-intensity-aviation-obstruction-light-10000851
Type: LampUse: NOCondition: NewSize: 335*300*300
Place of Origin: Shanghai China (Mainland)Model Number: LM100Brand Name: NANHUAColor: Red
International standard: ICAO medium intensity aviation obstruction light \and FAA-L864Light source: LEDWorking mode: Steady burning or flashing (optional)Power consumption: 65W(steady burning)
Flashing rate: 20-60 times/minIP protection: IP65Weight: 7.5kgLifetime: ≥100,000h
Light source power: ≥60W   
Medium Intensity Aviation Obstruction Light
contact supplier for Medium Intensity Aviation Obstruction Light


LM100 Medium intensity obstruction light for making Towers(Telecom,GSM),Smokestacks (heat-engine plant,coking plant chemical plant etc),Buildings,Port devise,Construction machinery,wind power generator etc for air traffic warning.

Major Functions&Features

• Optics design based on fresnel lens principle

• Based on LED technology, with external long life, low power consumption and high efficiency.

• PC lamp housing with the sound impact resistance, thermal stability and luster effect.

• Die casting aluminum base, shockproof and corrosion resistant.

• No RF-radiations, EMC Compliant. And constant LED drive to prolong led life

• Sealed material: waterproof sealing ring

• Combustibility rating:UL94-V0.

• Windspeed resistance grade: ≥240Km/h

• Light failure alarm or GPS is available if requires.

• Mounting bracket is also available if requires

Major Functions&Features

• Optics design based on fresnel lens principle

• Based on LED technology, with external long life, low power consumption and high efficiency

• PC lamp housing with the sound impact resistance, thermal stability and luster effect.

• Die casting aluminum base, shockproof and corrosion resistant.

• No RF-radiations, EMC Compliant. And constant LED drive to prolong led life.

• Sealed material: waterproof sealing ring.

• Combustibility rating:UL94-V0.

• Windspeed resistance grade:≥240Km/h

• Light failure alarm or GPS is available if requires

•Mounting bracket is also available if requires

Specification

International standard

ICAO(Annex 14)medium intensity aviation obstruction light standard and FAA-L864

ColorRed

Light source

LED

Intensity2000cd±25% cd

Working mode

Steady burning or flashing (optional)

Vertical degree≥3

Horizontal degree

360

VoltageAC110V~AC240V

Power consumption

65W(steady burning)

Light source power≥60W

LED life

≥100,000h

Flashing rate20-60 times/min

Flashing duration

150ms~1.5s(optional)

On/Off level50lux(optional)
Ambient temperature

-40°C ~ +55°C

IP protection

IP65
Humidity

10% ~ 95% (no coagulation)

Weight

7.5kg

Installation and operation

• Secure the light on a smooth surface which has enough strength, if there is no mounting surface, we can customize special mounting bracket as request.

• When installation, please stay away the nearby light source, at the same time, ensure the photocell do not cover by the near object.

• Make sure the power supply can match the rated power of light before connecting.

• Unfasten three buckles on the base and overturn the lamp body, the n the terminals appear.

• Insert the power cable from the cable gland and then connect them to the corresponding terminals inside the lamp body.

• After finishing the connection, fasten the buckles.

• Check whether the power cables are connected correctly before power on.

Notice

• Ensure that the power connection part is correct before using

• Temperature rise when light working is normal phenomenon.

• Please do not open any components inside by yourself.

• This product is a sealed structure; Please do not be tampered with by anyone other than registered installer. Once found, we are not warranty.

Packaging Detail:cartons
Delivery Detail:Normally 10 days depend on order quantity

Related Product for Medium Intensity Aviation Obstruction Light