Medium Intensity Aviation Obstruction Light - LM001

LM001 Medium intensity obstruction light (Type B) for marking Towers (Telecom, GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a flashing red safety light. It is certified by ICAO

The enclosure of LM001 is made of die casting aluminum with powder coated finish, light weight, waterproof, shockproof and corrosion resistant. Self-contained wiring compartment, ease of mount. Steel wire is used to connect to base against falling in operation.

Functions & Features

• Modular design and meets optics standard, compact size and high efficiency.
• Based on LED technology
• Extremely reliable - major maintenance cost saving.
• Resistant to shock and vibrations
• Corrosion resistant lamp& housing
• Self-contained wiring compartment - eliminates additional boxes.
• Several mounting styles are available
• Designed to mount onto existing bolt pattern installations
• Base material-- die casting aluminum LM6
• Lamp housing—Polycarbonate, with good intensity and thermal stability and good finishing sruface
• Reflector - ABS
• Outer sealing material—waterproof seal gasket
• Combustibility rating : UL94V0
• IP protection : IP65
• Operating temperature : -40°C - +60°C, can withstand the most severe environments
• Can be flashed or steady burning (controller not supplied)
• Aviation red type
• Typical LED lifetime : ≥100, 000 hrs
• All LEDS are connected in parallel, which are powered by low voltage, constant current; when and if one LED fails, it will not affect other LEDS
• Power feeding part consists of two switching power supplies, which provides electricity to LEDS respectively(A1,A3,A5 and A2, A4, A6), when one power supply fails, it will not affect the other one, to ensure maximum life of the product

Wiring

• Unfasten two screws fixed on the nameplate and then remove the nameplate panel
• Insert the power cable and control from the gland box and then connect them to the corresponding terminals inside the lamp body
• Verify whether the power cable and the control cable are well connected before power on

Notice

• Check whether the power cables are connected correctly before power on
• Temperature rise inside the control box is normal phenomenon
• Please do not open the control box by yourself
• This product is a sealed structure; Should not be tampered with by anyone other than registered installer.

Product File

• Model: LM001
• On Stream Date: S. , 2008
• Applications: High building, tower, crane, high chimney, lighthouse, high voltage cable tower, oil well, etc.
• Standard: MH-T 6012-1999; ICAO Annex 14
• Certificate: CE certification, ICAO
• Patent:Utility model patents, Patent No.:ZL 2008 2 0153770.X