ZONDA - ZONDA

carbon bicycle frame, 1.light weight, 2.high rigidity, 3.sample available, 4.Integrated seatpost tube design - details see: https://www.vehicleto.com/zonda-10007588
Material: CarbonFoldable: NoSize: 48 - 52cmUse: Road Bicycles,Time trail
Weight: 1450 +- 20gPlace of Origin: TaiwanBrand Name: karbonaModel Number: ZONDA
carbon High modula: aero dynamic   
ZONDA
contact supplier for ZONDA


carbon bicycle frame
Monocoque HM carbon fiber UD woven in glossy
Integrated seatpost tube design
Aerodynamically natural seatpost
Adjustable Double angles of 76 degree and 74 degree
Weight :1450g±20g for medium size
Existing size : M, S and L to be available

1. Raw material sources: basically Karbona's frames and rims are made of Japan Toray and Tohop 700 high modules carbon fiber with hot melt PPG.

2. Production method: Karbona's carbon frames and rims are made by using the bladder molding system which enables the maximum inner molding pressure to compact the carbon lamination and provide more rigidity.

The process in making the carbon frames and rims lighten the weight and less expensive compares the way by using foam or nomex honeycomb structure. Ultaling a carbon molding instead of a hard structure frames and rims not only keeps costs realistic it also significantly enhances ride comfort.

3. Certified standard: Karbona's carbon frames have been tested successfully by the EN 14781 frames fatigue and impact testing. Besides, Karbona's carbon rims have been tested successfully by the EN 14764 rims fatigue and impact testing and nipple hole pull through test which Karbona recommended cold tire pressure 116PSI/ 8bar and spoke tension for side pressure as of 50mm /180kg

4. Maximum loading: 220 lbs

5. Production process: The carbon frames and rims that Karbona provided are made systematically due process of carbon pre-preg angle cutting lay up formular molding and oil pressure forming procedures.

6. Quality assurance:

(1) Pre-preg: Carbon/Epoxy pre-preg including resin content and fiber arial weight and even flatness

(2) Fiber angle applying: checking angle and width.

(3) Pre-preg die cutting: checking die and pre-preg and adjust space

(4) Material preparation: checking the construction drawing and quantity of laminations and reinforcement and mandrel as well.

(5)Lay Up wrapping: Checking the weight and outside diameter.

(6) Resin agent applying: checking clearness and position

7. Molding: checking pre-preg pinch and clearness and silicon rubber

8. Compression molding for cooling: checking temperature and raw blade

9. Trimming and cutting: checking the surface and inside circumference.

Othaer bicycle part for this frame

Packaging Detail:full carton packaging
Delivery Detail:30 days

Related Product for ZONDA