Cutting Plotter Vinyl, Reflective Film Tape, Traffic Sign Making Film RS-UG3200 Series - RS-UG3200

V-RETRO™ Reflective Sheeting

V-RETRO™ Reflective Material Utility Grade Reflective Sheeting RS-UG3200 Series are economical/commercial/advertising reflective, weatherproof, self-adhesive films with excellent corrosion and solvent resistance. The smooth surface allows a very good printability. The retro reflective system of optical lens elements (micro glass beads) enclosed within a transparent resin that has a smooth, flat outer surface. They are available in all traffic signing colors and are produced in rolls and sheets. Customized colors are workable.

Features

• 3 Year Durability
• Plotter Cutting Graphic
• Multiple Printing Methods
• Micro Glass Bead Technology
• Pressure Sensitive Adhesive (Clear Color)
• Roll Size 48” x 150ft (or slitting into smaller rolls)
• Meet Multiple Specifications
• -U.S. ASTM D4956 Type I (U.S.A)
• -DIN 67520, DIN 6171-1 (German)
• -BS EN 12899-1:2007 and BS 8408:2005 Class RA1 (U.K.)
• Application at temperatures of 65°F (18°C) or higher

V-RETRO^™Reflective Material Utility Grade Reflective Sheeting RS-UG3200 Seriesis available in the following colors.

Description

V-RETRO™ Reflective Material Utility Grade Reflective Sheeting RS-UG3200 Series meet ASTM D4956 Type I, EN 12899-1 Class RA1 and DIN 67520, is an enclosed micro glass beads retro reflective lens, pressure sensitive adhesive coated sheeting with an easy release liner, intended for production of non-critical traffic signs, advertising signs that are exposed vertically in service.

Applied to properly prepared sign substrates, V-RETRO™ Reflective Material Utility Grade Reflective Sheeting RS-UG3200 Series should provide as long as 3 years of reflectivity and durability.

Photometries

Coefficients of Retroreflection (RA)

The values in Table A and B are minimum coefficients of retroreflection expressed in candelas per lux per square meter (cd/lux/m2).

Coefficients of Retro reflection (Required by North American Market)

Conformance to coefficient of retro reflection requirements shall be determined by instrumental method in accordance with ASTM E-810 “Test Method for Coefficient of Retroreflection of Retroreflective Sheeting”.

Table A - Coefficient of Retroreflection RA for new reflective sheeting (cd/lux/m2) per ASTM D4956 Type I

Table A- Coefficient of Retroreflection R_Afor new reflective sheeting (cd/lux/m2) per ASTM D4956 Type I

Coefficients of Retro reflection (Required by European Market)

Measured in accordance with the procedure specified in CIE 54.2, using CIE standard illuminant A, the minimum initial coefficient of retroreflection RA (cd/lux/m2) of retroreflective material, shall meet or exceed the values in Table B.

The coefficient of retroreflection (RA) of all printed colors, except white, shall be not less than 70 % of the values in Table C for Class RA1.

Table B - Coefficient of retroreflection R_AClass RA1 per EN 12899-1 : 2007

Key Words

Reflective sheeting, reflected sheeting, reflective sheet, retroreflective sheeting, retroreflective vinyl, reflective vinyl,3M utility grade reflective sheeting, reflective material for road signs, reflex sheeting