H.264 bus DVR with DC12V power output for cameras - FTH-DVR-F3

H.264 bus DVR with DC12V power output, 1,Working indicators, 2,Playback video &GPS track, 3,Alarm videos, 4,Motion detection - details see: https://www.vehicleto.com/h-264-bus-dvr-with-dc12v-power-output-for-cameras-10022182
Certification: CEPlace of Origin: Guangdong China (Mainland)Brand Name: FurtherModel Number: FTH-DVR-F3
Working indicators: YesGPS history track: YesSoftware: YesLanguage: English/Chinese
Storage temperature: -40~85 °CChannel: 4Input voltage: 6~36VOutput voltage: 5V*1A, 12V*2A
Warranty: 1 yearSize: 161*150*55 mm  
H.264 bus DVR with DC12V power output for cameras
contact supplier for H.264 bus DVR with DC12V power output for cameras


H.264 bus DVR with DC12V power output for cameras

Specification

Video

Video Input

Input4CH Video Input(PAL/ NTSC 1.0Vp-p)
CompressionH.264(available convert to AVI video file)
ResolutionCIF(Up to 4CH/100FPS),HD1,D1(Up to 4CH/48FPS)
Video qualityQuality 1~8, 1 is best.
FramePAL 1~25fps,NTSC 1~30fps
Video OutputOutput2CH video output: CVBS signal(PAL/ NTSC 1.0Vp-p)

Video playback

Display1 screen/2-screen/4-screen preview video

Recording

Power-on recording, Manual recording, cycle recording, timer recording, pre-recording
Support OSD(Such aslicense plate number,time etc.)
Playback2×,4×,8×,16X times fast forward / rewind playback

,1/2×,1/4×,1/8×,1/16×timesslow, pause, 4CH playback

Audio

Audio input4CH input(RCA)
Audio output1CH audio output

SD card

Up to 64GB

Backup

One USB1.1 interface storage GPS

Double storage

One USB2.0interface export, output storage file, video file frame rate can be set

Auto power save

Supportauto-save feature when suddenly lose power(delay 10 seconds) to make sure video files not damaged

Alarm

Alarm conditions

SD cardabnormal alarm
Video signal loss alarm
System software failure alarm
Low-speed alarm(Can be set,less than 10KM)
High-speed alarm(Can be set,more than 150KM)

Alarm input

4CH input switching signal,support 24Vvoltage input

Alarm output

1CH switching signal output
Buaaer beeps
Status IndicationLED output8 LEDs: power, fault indication, recording status, video loss, SD card status, 3G/GPS status, device running status, hard drive status

Port Supplement

RS232 portOne RS232 port can connect GPS,GPRSdevices etc.
USB1.1 portData backup,intelligent software upgrade etc.
InfraredFor remote control
RS485 portOne RS485 port to control PTZ

System

LanguageSimplified and traditional Chinese and English

Interface

Infrared remote control to control it
Full menu (OSD) graphical user interface

Safety

Two user rights management
Password encryption

Time/Log

Built-in clock
Detailed log can record On/Off power, alarm, network, plug SD card, take out hard drive, operating and other information.
Voltage input6V~36V
Voltage output5V@2A,12V@2A
Power<=15W,hard drive is not included

Software Requirement

User management

Password protection:Reserved super password
Login: You can setup and operate the device after login.

Power On/Off

Equipment in the standby
1,Remote control turns off device or make it in the standby.

2,Support to turn on device by remote control when there is power to device.

3,Ignition recording.

4,Timer recording.

5,Delay recording. 0~4 hours optional.

Parameter settings

Remote operation
Load parameters by U disk or SD card.
Export device settings and generate it to configuration file, the configuration file format is the same as the PC configuration tool’s.
Others:

1,Can modify the video quality, frame rate, resolution.

2,Can close any channel video and voice recording function.

3,When the corresponding video channel is closed, the corresponding audio channel automatically shut down

4,When parameter setting does not succeed, you should reset it.

OSD superimposed informationEach device has its ID, you can set the license plate number, vehicle lines, company information, and change channel name
Software UpgradeSupport to be upgraded by network interface, USB, and SD card.

Data Storage

Each channel has its independent video file and save the synchronous information.
Automatic overwrite switch
Data exportSupport to export video files by USB.

Search for Playback

Support to search video file according to time and event.
Select the searched file and then play it.
Support 4CH playback at the same time

1, 4CH video can be playback at the same time

2, When one of the video files is lost, it just playback other video files. It shows video lost in the screen ( blue screen).

3, Audio and video are synchronous, only playback the selected channel audio.

4,It will search for the next file automatically after finishing the playbacks for each channel.

5,When playback video, it can be chosen any channel video to playback.

Mechanical Indexes

Working TemperatureStarting temperature 0°C~60°C, working temperature-10°C~70°C.
Storage Temperature-40°C~85°C
Interface FeatureAll interfaces are antistatic.
PC Suite SoftwarePC Playback AnalysisWhen video is playback in PC, it shows vehicle in the Google map, alarm message and accelerated etc.

Packaging Detail:In a color carton for each unit
Delivery Detail:In 2~7 days

Related Product for H.264 bus DVR with DC12V power output for cameras