Medium-sized Bus Series PCR tyres 6.50R15LT , 7.00R16LT

Characteristics

1.Super strength,endurance,stability and safety come with K816's strong patterns.

2.Four zigzag grooves and super strong structure,enabling it to perform well in the case of various roads and climate,good capacity of gripping,baking and cornering,making it flexible.

3.Extra-deep patters,perfect tread formula as well as good proportion of blocks,increasing its endurance and expanding its life span.

4.Proportional shoulder grooves,evenly taking the pressure and increasing its endurance.

Specifications:

Packing& Picture of k-816

Certifications:

Workshop & equipment

The proper use and maintenance

1.Air pressure

*Tire should be inflated according to current national standards stipulated in the form of air pressure&loading index.

*After inflation tire should be checked carefully for leak or not.If leak found shall be repaired in time.

*Tires in use must be ensured of normal internal air pressure.When long-running or driving,tire pressure should be regularly checked.Long –stay parking, front and rear axles must be set up.

*High pressure cause crown grinding,top bursting;low pressure make tire deformation and damage.

*Twin tires fitted must be assure of consistent inflation pressure, do not fit one by a higher pressure and another by lower air pressure.

2.Loading

*Tire loads must comply with current national standards.Do not overloading.

*Loading goods in vehicles should be distributed evenly to avoid uneven load.

*Overloading can cause serious abnormal tire tread wear,shoulder separation, delaminating,toe blasting etc.

*High ply level and high tires load index not suitable high-speed driving.

*Enhanced design tires can loaded more properly according to standards of design.

3.Speed

*Different limits of speed levels with all kinds of tires,speeding may cause early tire damage

*Do not speeding, minimize urgent braking and sharp turns in bad road,avoiding of the tire’s hitting other objects,especially sharp objects.

*High speed tires will be heated up easily,once its temperature is too high, measures should be taken timely to prevent the carcase bursting.

*High-speed tires assembled with rims must be tested for balancing weight and calibration.

4.Storage

*Tires should be stored in the warehouse avoiding the sunning and raining.

*Tire must be in storage away from heat,ozone, and generator.

*Tires must be in storage together with oil,flammable and corrosive chemicals materials.

*Tires shall be in storage upright, do not keep it horizontally, piling up one on top of another or hanging it by center hole.

*Tire should be used firstly in order of first out from production or storage

5.Shipping

*When handing tire by forklift, do it from side tires, do not lift it with fork into the center hole of bead.

*Do not hang or raise tires by rope, hook or fork directly, do it with wide textile fiber belt.

*Sets of tires shall be wrapped or packed by rope or packing tape for avoiding damage of falling .

*Loading goods must be properly distributed into vehicles.

6.Assemble

*Tires must be fitted to the proper models of vehicles and the wheel, installation and removal of tires with specialized tools and equipments,any violent prying and hitting prohibited.

*Tires on the same axle must be the same structure,size,pattern and ply.

*Never install bias tires and radial together.

*Directions of tires running must be kept consistent to the vehicle when assembly directional tires.

*Keep chains equipped in tires symmetrical.If not uninstall it immediaterly

7.Pattern

*Longitudinal tread pattern with less rolling resistance and fast speed, suit for cement, asphalt and other solid road surface.

*Cross groove with excellent grasping and climbing performance, adapt to ordinary road situation in china.

*Combined rib-lug pattern adapt to where no road or bad road condition.

*Tires must be rejected when tread wear to abrasion mark.